接触器 — CJX9系列接触器 
Application
CJX9 (Or HX20) Series Air Condition AC Contactor is mainly applicable to a line of AC 50Hz or 60Hz, rated insulation voltage is 240V and rated working current up to 60A, used to close or switch off the line
Air conditioner contactors are definite purpose AC contactor are designed for use in refrigeration, air conditioning, and electric heating systens.
Power connections can be made with either screw terminals with quick connects or lug terminals with quick connects
They comply with IEC60947-4-1
Specification
Model No | Full load Amps( A ) | Resistive Amps(A) | Pole No. | Coil Voltage ( V) 50/60HZ | Line Voltage (V) | Max HP | ||
Voltage (V) | Single Phase | Three Phase | ||||||
CJX9-20/1 | 20 | 30 | 1 | 24 | 240/277 | 120 | 1.5 | - |
CJX9-20/1.5 | 1.5 | |||||||
CJX9-20/2 | 2 | |||||||
CJX9-20/3 | 3 | 120 | 480 | 240/270 | 3 | 7.5 | ||
CJX9-20/4 | 4 | 208/240 | 600 | 480/600 | - | 7.5 | ||
CJX9-25/1.5 | 25 | 35 | 1.5 | 24 | 240/277 | 120 | 2 | - |
CJX9-25/2 | 2 | |||||||
CJX9-25/3 | 3 | 120 | 480 | 240/270 | 5 | 7.5 | ||
CJX9-25/4 | 4 | 208/240 | 600 | 480/600 | - | 15/20 | ||
CJX9-30/1.5 | 30 | 40 | 1.5 | 24 | 240/277 | 120 | 2 | - |
CJX9-30/2 | 2 | 120 | 480 | 240/270 | 5 | 10 | ||
CJX9-30/3 | 3 | 208/240 | 600 | 480/600 | - | 15/20 | ||
CJX9-30/4 | 4 | |||||||
CJX9-40/2 | 40 | 50 | 2 | 24 | 240/277 | 120 | 3 | - |
CJX9-40/3 | 40 | 50 | 3 | 120 | 480 | 240/270 | 7.5 | 10 |
CJX9-40/4 | 40 | 50 | 4 | 208/240 | 600 | 480/600 | - | 15/20 |
NORMALAUNNING AND INSTALLATION CONDITIONS
•Ambient air temperature:-5℃~+40℃, the average value should not exceed+35℃ within 24 hours.
•Elevation:at most 2000m.
•Atmospheric conditions:When the temperature at 40, the relative humidity of atomsphere should be at the most 50%. When at relatively low temperatures, it could have higher relative humidity. Monthly maximum relative humidity could be not more than 90% . Special measures should be taken due to occurrence of dews.
•Class of pollution:Class 3
•Installation category: III
•Installation conditions:Degree of inclination between fitting surface and vertical surface should not exceed I
•Impact shock:Product should be installed and used in the place where often shakes and impacts.
英文二维码 
中文二维码